This is my new Exclusive Kellyenterprises/Omega KE-94RS RCM Pistol and is only available here at These guns are a very high quaility build using only the best RCM USA and HK Milspec parts available. These guns start with New LSC Gen 3 upper receiver flats that are rolled and welded in house at Omega. To keep the costs competetive and still retain a very high quality we are using the following New RCM "F" style MP5k Parts. A New RCM MP5k Navy Threaded / Trilug Cold Hammer Forged Barrel w/thread protectors, The New RCM "F" Style MP5K  Carriers and Bolt Heads, a New RCM MP5k 110 degree locking piece, a New RCM MP5K Trunion, a New RCM MP5 Extractor, and a New RCM MP5 Front site. All the RCM Parts 100% New and are to current HK Military specs.

RCM makes HK Milspec Parts to exacting tolerances and are widely know as the best Milspec H&K parts made in the USA. These "F" series MP5 Internals and barrels are Sear Ready and built for sustained Full Auto fire. All that is needed is a Registered ATF HK Auto sear to be installed and these guns will run Full Auto without any modification. Others in the market charge over $3000 for a gun made with the same internals.  These KE94 SERIES Firearms are some of the best made firearms and will give you years of trouble free service at the best price possible of ANY similar gun in the marketplace today.

The rest of the Internal Parts will be new HK MP5K Milspec Parts. We will use New Cocking Tubes along with HK SUO lowers. This gun will come with a Choate End Cap w/Sling mounts and MP5K handguard and the correct MP5K Front and Rear Sights. The Gun will be Parkerized first, then finished with a baked on Epoxy Matte Black Finish. Each gun will be Laser bore sighted during the build and extensively factory test fired in Full and Semi Auto modes before it leaves the shop. These will be a perfect host for your HK Full Auto Sears or an SBR or Armbrace Pistol Conversion. We believe that this unit will fill a void that exists in the High Quality HK Style 94RS market today.

The KE-94RS "Reverse Stretch" is an 94/MP5 Receiver with the shorter 94K/MP5K Internals, RS Recoil Rod and 5" barrel, the same front end that is on the MP5k. This version allows you to install any typical MP5 rear stock, Including Para Telesocks, Choat Side Folders, and Polymer Full Stocks when you do an SBR Conversion. The KE-94k / MP5k pistol we will produce will be similar to an SP89  but with a full auto bolt carrier. All these guns will be Sear Ready for your ATF Registered Full Auto Sears.

Both the KE-94 "RS" and the KE-94k will have RCM MP5K Navy Cold Hammer Forged Barrels and RCM Internals. They will start with LSC Receivers, rolled at Omega. The following RCM Internal Parts will be in both these models. These are the latest HK "F" Style Blueprinted parts. The RCM MP5K Navy Threaded / Trilug Barrels, MP5K Bolt Heads, MP5K Extractors, MP5K 110 Degree Locking piece, MP5K Carriers, MP5K Trunion, and MP5K Front and Rear sights. All these parts are marked RCM to verify their quality. All guns will now come with Black Epoxy Baked on Finish. 

This gun is 100% 922 Compliant. Comes with 1 New HK GERMANY 30rd mag, 1 Quality Range Bag, 1 Promag Sling w/HK style snap clips, free shipping and a 2 year factory limited warranty.

 We are Proud to post all of the parts our guns are made from. Unlike other MFG's we believe you should know exactly what you are buying. Contact me anytime 7 days a week if you have any questions or need any help with your purchase.